...
The big red dots show the position of each Switch State. Make sure you also have the positions assigned as in the image. Also with no LED next to it.
...
Step 5. Add an Indicator Light to all three LED’s
...
Press Play and move the Slider to the first Switch State to test the first LED.
NOTE: If you are switched to GameView as a result of going into PlayMode, switch back to SceneView in order to be able to move the Slider.
...
As you can see, the LED turns on. However, it turns on halfway between State [0] and State [1]. To correct this, adjust the Lower Weight of State [1] to 0.
...