2021.1.1208.2 Belt Renderer

1 Overview
2 Where to find
3 Feature Layout
4 How to use
- 4.1 1. Assign Belt Rolls.
- 4.2 2. (Re)position Belt Rolls if necessary

Overview

The Belt Renderer allows you to generate a circumference SplineUNDEFINED for the Loft Mesh of a Belt System using two Belt Rolls or more.

Where to find

Add a Belt Renderer to your scene by navigating to Standard Components > Belt System > Belt Renderer

It will automatically be attached to a selected GameObject or otherwise it will create a new GameObject to attach to.

Feature Layout

Belt Settings
Show Spline Normal	Toggle to enable or disable the Spline normal
Flip Spline Normal	Flips the Spline normal between inside and outside the spline
Show Control Point Labels	Toggle to enable or disable the Spline Control Point Labels
Change Belt Direction	Changes the Belt direction for all assigned Belt Rolls
Belt Rolls	A list of all assigned Belt Rolls
Size	The number of Belt Rolls needed for generating the Spline
Element [X]	Each individual assigned Belt Roll

How to use

1. Assign Belt Rolls.

The Belt Renderer needs at least two Belt Rolls to be able to generate a SplineUNDEFINED .
Assign all Belt Rolls to the Belt Renderer, a Spline will automatically be generated if one can be calculated.

IMPORTANT: For Belt Rolls to be compatible with each other, they must all share the same Axis Direction and be in the same Plane

2. (Re)position Belt Rolls if necessary

The generated Spline moves along with the Belt Rolls. If you need to adjust the position of the Belt Rolls or their radii, the Spline automatically updates.