The Control Panel Interface serves as a control panel component from the Unity inspector for physical systems.
The Control Panel can be found under Standard Components > Add Control Panel.
In addition, a Control Panel can also be added to a Physical Component via its Inspector. You will need to create a Physical Component first. For instance, a DC Motor (example below).
Shows the control panel of the selected component you wish to control
Select the GameObject with the component you wish to control through the Control panel
Selected Control Panel
Select the specific component you wish to control
Apply the selected Standard Component to the Control Panel
Reset the Control Panel and clear any previous settings
Example of a suitable (DC Motor) and not suitable (Directional Light) component.
The Control Panel will change depending on the selected component. Please refer to each Standard Component for an explanation on the Control Panel Features
If no component is connected to the Control Panel, go to Properties, select a GameObject and a component. Press Apply to apply the selected component to the Control Panel
If the Control Panel is already connected to a suitable component, refer to the documentation of the selected component